Application: MY04~06 SUBARU LEGACY GT / Liberty
Bearing Type: Journal Bearing
Cooling System: Water cooled
Compressor Wheel: 43.3 / 56 mm ( Inducer / Exducer)
Turbine Wheel: 40.4 / 53.3 mm (Inducer / Exducer) Inconel Wheel
Condition: CHRA was balanced by Schenck MBRS 110 From Germany
Код | 37264 |
2.0-3.0L-V-clamp
Flange: Inlet T3,Outlet V-clamp
Actuator: External
Max HP: 470+
Instal billet wheel: +15~25% hp
TURBINE:
Wheel: TD06SL2
Diameter: 54/61 mm
A/R: 73
Nozzle area: 10cm²
COMPRESSOR:
Wheel: 601
Diameter: 59/76 mm
CFM: 750
Код | 45263 |
Код | 40132 |
Код | 171539 |
-Для Mitsubishi TD04L Turbo P/N: 49377-04100/49377-04200/49377-04300/49377-04502/49377-04504/49377-04505
-Для SUBARU S/P: 14412AA360/14412-AA140/14412-AA360/14412-AA451/14412-AA532/14412-AA560
-Для SUBARU 1999 ~ 2008 Forester XT 58T SG9 EJ205 EJ255
-Для 1998 ~ 99 Subaru IMPREZA WRX GDA GGA EJ205 EJ255
-Для 2002 ~ 07 Subaru IMPREZA WRX GDA GGA EJ205 EJ255
-Для 2004 ~ 06 Subaru Baja XT BT EJ255
-Для 2005 ~ 06 Saab 9-2X Aero GGA EJ205 EJ255
- Он может заменить TD04L WRX напрямую без модификации (турбо на болтах)
- Диапазон мощности: 350-400 л.с.
Максимальная мощность, указанная для каждого турбонагнетателя, была рассчитана строго на основе потока дроссельной заслонки карты компрессора (общая мощность турбонаддува), представляющей потенциальную мощность маховика.
Результаты работы этого продукта сильно зависят от модификаций и настройки/калибровки вашего автомобиля.
CHRA Size
- TD05H-18G
Код | 211511 |
Код | 26375 |
- VOLVO 850 / S70 Turbo: 49189-01400, 49189-01401, 49189-01410, 49189-01420, 49189-01430, 49189-01360, 49189-01300, 49189-01301, 49189-01310, 49189-01320,49189-01330, 49189-01335, 49189-01350, 49189-01355, 49189-01450, 49189-01455, 49189-05010, 49189-05101,49189-05111, 49189-01355, 49189-05000, 49189-05100, 49189-05400, 49189-05401, 49189-05410, 49189-05411…
- Mitsubishi 4G63T DSM AUTO / RVR : 49189-02500, 49189-04100, 49189-04200, 49189-04300
- MWM 6.07T : 49189-03200, 49189-03201, 49189-03210
- SAAB 9.3 / 9.5 / 9000 / 9000 AERO B235R B234R : 49189-01600, 49189-00170, 49189-01800
- JCB / ISUZU 4BD1T : 49189-00501, 49189-00511, 49189-00520, 49189-00530, 49189-00540, 49189-00550
- KATO 4B31T: 49189-00800
- KUBOTA: A47GT: 49189-00900
- Greddy/TRUST : TD04HL-13G, TD04HL-15G, TD04HL-16T, TD04HL-19T turbo
- GM OPEL / SAAB / Cadillac SRX 2.8L Turbo: 49389-01700.
Be careful All GREDDY/TRUST’s “TD04H” turbo is “TD04HL” turbo with this turbine wheel.
Wheel Spec. - Inducer: 52 mm / 2.05 inch
- Exducer: 45.6 mm / 1.79 inch
- Tip: 8.9 mm / 0.35 inch
- Turbine Shaft OD: 7.5mm / 0.29 inch
- No. of Blades : 9
Material Upgrade Inconel 718 for performance
Код | 187120 |
Код | 130281 |
Код | 138439 |
Код | 139221 |
Car make: TOYOTA
Application: HILUX, HIACE D4D,LANDCRUISER 2KD-FTV 2.5TD
Engine type: DIESEL
OE NO: 17201-0L050
Repalcement for turbo OE number: 17201-30141/ 17201-30140/ 17201-0L050/ 17201-0L080
Model: CT
Cooling:OIL-COOLED
Compressor wheel: 36/51 mm
Turbine wheel: 38.05/45.7 mm
Код | 45274 |
- For Nissan CA18DET Silvia S13 180SX/ 200SX (Europe)/ 240SX (North America)
- For Nissan SR20DET Silvia S13 S14 S15/ 200SX (AUS/NZ)/ 240SX (North America)
- Replace and refresh the stock for the Garrett T28 TURBO directly.
- Horsepower Range: 380~420whp
CHRA Size
TD06SL2-18G
Wheels Spec
- Compressor wheels: 50.3/68 mm
(The 6+6 blades are better for low-end torque)
- Turbine wheel: 54.1 / 61 mm 9 Blades STS
Kinugawa Turbo Systems STS (Superior Turbine Strike) advanced cartridges come with dual ceramic ball bearing cages and 9 blades high flow turbine wheels improve the response speed (time needed to build boost) 10-15% as well as being more durable due to the improved shaft dynamics control. The increased power comes from the enhanced design. It utilizes an inner and outer race with rollers or balls between the two races. The inner race is pressed onto the turbo shaft, and the outer race is pressed into the CHRA. The rollers or balls replace the oil’s “job” of controlling the turbo shaft’s orientation but do still need to be lubricated but the oil restrictor had been defaulting embedded in the bearing housing to reduce oil supply more.
Turbines Housing
- A/R 8cm^2 /.57
Compressor Housing
- A/R .60
- 3" inlet
- 2" outlet
Bearing Type
- Dual Ceramic Ball Bearing
Cooling Type
- oil and water cooling
Actuator Pressure
-1.0 bar / 14.7 psi-drive will go with Turbo.
The set includes
- 1 x turbine inlet/outlet gasket
- 1 x compressor input / Output gasket
- 1 x Return gasket
- 1 x Oil supply set
- 1 x Return Oil Pipeline
- 1 x water supply kit for water (6AN hose)
- 8 x cloves and nut set
- 1 x Balance Report with anti-counterfeit tag
Situation
Brand New
Provider
Kinugawa Turbo Systems
Код | 214330 |
Код | 132357 |
Car make: MITSUBISHI 4D56T 2.5TD 1993~
Application: L200,L300,L400,SHOGUN,DELICA,PAJERO 4D56T
Engine type: DIESEL
OE NO: 49177-01515 / MR355220
Repalcement for turbo OE number: 49177-01501/ 49177-01504/ 49177-01505/ 49177-01514/ 49177-01515/ 49177-01521/ 49177-01531/49177-01510
Model: TD04-10T-4
Cooling:WATER-COOLED
Compressor wheel: 35.5/49 mm
Turbine wheel: 40/47.2 mm
Код | 45268 |
Car make: SCANIA
Application: Scania Truck 124 with DC12 01/02/03/05/06 Engine.
Engine type: DIESEL
OE NO: 4038616D
Repalcement for turbo OE number: 4038616D
Model: HX55
Cooling:OIL-COOLED
Compressor wheel: 67/99 mm
Turbine wheel: 80/86.1 mm
Код | 45284 |