| Код | 150679 |
Fits B2 Turbo Frame
1.45 A/R
Volute, Twin Flow Configuration
T4 Inlet
80mm Turbine Wheel Design
Non-Internal Wastegate Housing (External Reqd.)
BorgWarner EFR 9180
| Код | 150696 |
Turbo Spec :
- Compressor Wheel：52.5 mm / 68 mm (Inducer / Exducer)
- Turbine Wheel：56 / 49.2mm (Inducer / Exducer)
- Turbine Housing A/R：8cm
- Actuator Pressure : 1 Bar / 14.7 Psi
Max 280~350 HP
Includes
- Turbocharger x 1
- Oil & Water Line Kit x 1
- Turbine Inlet & Outlet Gasket Set x 1
- Compressor Outlet Gasket x 1
Item Situation
Brand New
Bearing System
Journal Bearing
Cooling System
Oil & Water Cooled System
| Код | 44032 |
| Код | 45772 |
a/r Value: 0,83ar
Turbine Wheel: 80mm
Flange type: T3 undivided / SingleScroll
Turbocharger: EFR 9180
| Код | 150692 |
| Код | 225621 |
850/ S80/ S70/ V70 2.3T 1991~1999 Angled FLANGE
Flange: ANGLED 2.8 INCH
Actuator: 0.5 BAR
Replacement for: Stock TD04HL Turbo P/N 49189-05000, 49189-05200, 49189-05210, 49189-05211, 49189-05111, 49189-05300, etc
Max HP: 290+
TURBINE:
Turbine Wheel: TD04HL
Diemeter: 45.6/52 mm
A/R: 49
Nozzle area: 7cm²
COMPRESSOR:
Compressor Wheel: 19T
Diemeter:46/58 mm
CFM: 450
| Код | 45302 |
a/r Value: 1,05ar
Turbine Wheel: 80mm
Flange type: T4 divided / TwinScroll
Turbocharger: EFR 9180
| Код | 150694 |
BorgWarner EFR-9180
For turbine wheels: 80mm>
A/R ratio: 0.92
Turbine flange: T4 divided / Twin Scroll
Wastegate: internal
| Код | 150693 |
a/r Value: 0,83ar
Turbine Wheel: 74mm
Flange type: T3 undivided / SingleScroll
Turbocharger: EFR 8374, EFR 9174
| Код | 150690 |
a/r Value: 0,83ar
Turbine Wheel: 70mm
Flange type: T3 undivided / SingleScroll
Turbocharger: EFR 7670
| Код | 150687 |
| Код | 85117 |
Она устанавливается горячей частью прямо на выпускной коллектор двигателя, откуда выбрасываются сгоревшие выхлопные газы, за счет выброса этих газов из двигателя турбина раскручивается и приводит в движение холодную часть с лопостями.
| Код | 40706 |
| Код | 150689 |
Данная турбина без горячей части (картридж с холодной частью), с увеличенной производительностью, выдаёт 400-500 л.с.!
Устанавливает BOLT ON (Болт Он - без каких либо переделок и изменений !)
Холодная часть турбины работает как обычный вентилятор с металлическими лопостями, и чем больше будут обороты двигателя, тем сильнее будет раскручиваться и холодная часть турбины.
Application:
- Upgrade Nissan 1JZ-GTE single CT15B turbo to Garrett 60-1 spec and get extra double air flow to gain HP
- Bolt on and fit stock turbine housing and actuator directly without modification.
Wheel spec.:
- Compressor Wheel :60 / 76mm (Garrett 60-1 Wheel)
- Turbine Wheel: 48 / 59.8 mm ( Stock Turbine Wheel)
Condition:
- Brand New
- Complete cartridge was balanced on Schenck MRBS 110 to make sure it can work very well.
- Ready to work.
- This CHRA kit can offer 400~450 HP easily.
Kit incl.:
- 1 x CT15B Compressor Housing machined to fit Garrett 60-1 compressor wheel.
- 1 x CT15B Cartridge with Garrett 60-1 wheel.
- 1 x Circlip between cover and Core.
| Код | 33841 |
SPECIFICATIONS
BEARING SYSTEM - Journal Bearing
COOLING SYSTEM - Oil and Water Cooled
COMPRESSOR
WHEEL DIAMETER
Inducer (mm) - 48.3
Exducer (mm) - 68
Blades - 6/6
COVER DIAMETER
Inlet (mm) - 51.2
Outlet (mm) - 40.8
Boost Pressure @ 1 bar (14.7 psi)
CFM - 600
lb/min - 41.4
A/R - 0.55
TURBINE
WHEEL DIAMETER
Inducer (mm) - 55.8
Exducer (mm) - 49.1
Blades - 12
FLANGE - STD SUBARU / IMPREZA
NOZZLE AREA (cm^2) - Mitsubishi SPEC - 7
A/R
Garrett SPEC 0.49
ACTUATOR - Standard @ 14.7 psi
ENGINE SIZE - 2.0~2.5L
WEIGHT - 16 lb
HORSEPOWER (BHP) - 280 - 340
ITEMS INCLUDED - Turbo Install Kit (320-14049-003)
| Код | 34062 |
CHRA Size: TD06H-20G
Turbine Housing AR 8 cm^2 Ported Turbine Housing
Flapper 34mm Larger Turbine Flapper
Bearing Type Journal Bearing / Performance Thrust Bearing Kit with larger thrust ring and flinger
Cooling Type Water-Cooled
Actuator Pressure - 1bar / 14~15 psi spring will go with this adjustable actuator. - we sell springs for different boost on our ebay shop.
Max Hp 350~420HP
Turbo Boost Limit 2.8 Bar ( Performance bearing kit with larger thrust bearing )
Suggested Boost 1.5 Bar
Extra parts Includes
Two Stainless Turbine Gasket
Oil feed line kit, Oil Drain Pipe kit, water coolant Pipe kit
Product Situation Brand New / CHRA assembled and QC by Kinugawa Turbo In Sage Japan
Balance 150,000 RPM on VSR
| Код | 37666 |
Описание
- CHRA Size : TD06-20G
- Compressor Wheel : 52.3 / 68mm
- Turbine Wheel : 55 / 65mm
- Turbine Housing AR : 8cm^2(0.57) / Internal Gate
- Compressor Housing AR : 60
- Journal Bearing(Performance Thrust Bearing Kit)
- Turbine Wheel Blades : 11 Blades
- Turbine Inlet Type : T3
- Cooled System : Water cooled
- 2.4” Compressor Inlet
- Actuator Pressure : 1.0 bar
(1.2bar,1.5 bar and 1.7 bar actuator is available,please contact us if you need it)
- Max HP : 300~450HP
В комплекте
- Turbocharger x 1
- Oil and Water Line kit x 1
- Oil Drain Pipe Kit x 1
- V-Band Adapter Kit x 1
- Turbine Gasket Set x 1
| Код | 32056 |